You can change the battery in your DSC Impassa by opening up the system, unplugging the old battery, unscrewing the battery tab, pulling out the battery, inserting the new one, reapplying the battery tab, plugging in the new battery and finally closing the DSC Impassa Alarm System.
It is necessary to replace the backup battery in a DSC Impassa every few years. Complete the following steps to change the battery in your DSC Impassa:
1. Open the system. On the front of the DSC Impassa System, there are two tabs that must be both individually pressed in before the system can be opened. The tabs can be pushed in using a small screwdriver or other sturdy thin object. Push both the tabs in, and then pull the front of the system away from the back to open it up. The two tabs on the front of the panel can be seen in the picture below:
2. Remove the old battery. Locate the battery inside the system. Unplug the battery from the board on the system. Then use a Phillips screwdriver to unscrew the tab holding the battery in place. With the tab released, the old battery can be taken out from the system. The picture below shows the battery plug and the battery tab:
How Do I Change the Battery in My DSC Impassa? You can change the battery in your DSC Impassa by opening up the system, unplugging the old battery, unscrewing the battery tab, pulling out the battery, inserting the new one, reapplying the battery tab, plugging in the new battery and finally closing the DSC Impassa Alarm System. This is a high-capacity ADT DSC Impassa Backup Battery High Capacity for Impassa wireless alarm systems. This battery is good for those that want more backup power just in case the electricity goes down, maybe 36 hours instead of 24. This battery is also required if you have a cell radio in the system.
3. Insert the new battery. Slide the new battery into the place of the old one. Plug the cable attached to the battery into the same plug-in on the board that the old battery was using. Then re-secure the battery tab using the screwdriver.
4. Close the system. Close the front of the system to its back. When doing this, the top portion of the system (opposite from the tabs) should be closed first. Then close the lower portion with the tabs. Make sure that both ends are securely closed. The tabs on the front should click into place.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / month
Click Here to Learn MoreRelated Products
Related Categories
- Answered
This system is not eligible for battery shipments.
Currently, ADT cannot ship replacement batteries to customers located in Alaska, Hawaii or Puerto Rico.
Don't worry! You may purchase replacement batteries from anywhere batteries are sold, including these retailers.
To make sure you get the correct battery for your system, please compare your current battery to the pictures below. Most batteries are available in battery supply stores in the camera section. ADT never recommends using an alkaline battery on systems that require a lithium battery.
Please remember to recycle your old battery. To find a battery recycler in your area, visit Call2Recycle.org.
Low battery: 1 system back up battery
Low battery: 1 system back up battery
Low battery: 1 system back up battery
The system number (or CS number)is the unique identifier assigned to every system. If you have more than one system installed on your premises, you will have more than one system number. When replacing batteries, it is important to note the right system number so that we can correctly calculate the price of your battery.
To make sure you get the correct battery for your system, please compare your current battery to the pictures below. ADT recommends never using an alkaline battery on systems that require a lithium battery.
System or PeripheralSystem batteries go into the main panel box of the security system. They are the primary source of back up power for the system.
Peripheral batteries go into sensors on windows, doors and other part of the premises. These are smaller than system batteries.
Order Summary
Battery: ADT Quality Service Plan
$0.00 when you order online. When you order on MyADT, your QSP provides one free system battery per year. Additional system batteries cost $29.99.
Shipping: $0.00
Sub-Total:
Estimated Tax:*
Total:**
*Estimated tax is based on your state sales tax.
**This order will be included in your next bill.
Battery:
Dimensions:
Type:
Item Number:
Max Quantity: 1 battery per order
Shipping Information:
To order a battery for another address, please change your location using the Change Location drop down before purchasing.
Order Summary
Battery: ADT Quality Service Plan
$0.00 when you order online. When you order on MyADT, your QSP provides one free system battery per year. Additional system batteries cost $29.99.
Shipping: $0.00
Sub-Total:
Estimated Tax:*
Total:**
*Estimated tax is based on your state sales tax.
**This order will be included in your next bill.
Battery:
Dimensions:
Type:
Item Number:
Max Quantity: 1 battery per order
Shipping Information:
To order a battery for another address, please change your location using the Change Location drop down before purchasing.
Thank you for placing your order
Adt Keypad Battery Replacement Video
Confirmation number:
You will receive an email confirmation shortly.
An email will also be sent when your order is shipped.
Adt Dsc Impassa 9057 Battery
For more information about your battery, visit the
Battery Replacement Guide.
Please remember to recycle your old battery. To find a battery recycler in your area, visit Call2Recycle.org.
To make changes to your order, please call 800-238-2727.
Order Summary
Battery: ADT Quality Service Plan
$0.00 when you order online. When you order on MyADT, your QSP provides one free system battery per year. Additional system batteries cost $29.99.
Shipping: $0.00
Sub-Total:
Estimated Tax:*
Total:**
*Estimated tax is based on your state sales tax.
17000152 Battery
**This order will be included in your next bill.
System Batteries (0)
Dsc Impassa Changing Battery
